Equipment and accessories for single stage reloading presses.

 

 Attention: Ultramounts in this section are dedicated mounts, NOT quick change.  Quick change is (Here)

Attention:     If you do not find a dedicated mount for the press you have or have limited bench space, the InLine Fabrication quick change mounting system might be very helpful to you.  We have quick change plates for ALL common reloading presses available today.     Swap your press in 30 seconds. Have a look (Here)

 

 

Single stage

Filter + View Grid
List
Ultramount™ Press Riser for Lee Breech Lock Challenger press
Ultramount™ Press Riser for Lee Breech Lock Challenger press
  The tall Ultramount raises your Lee Breech Lock Challenger press up 9-3/4" to get the shell holder closer to your eyes while increasing stability...
$85.00
Ultramount™ Press Riser for Lee Breech Lock Challenger press
Images / 1 / 2

Ultramount™ Press Riser for Lee Breech Lock Challenger press

$85.00

More Details →
Piggyback die rack for LEE Breech lock quick change bushings
Piggyback die rack for LEE Breech lock quick change bushings
The Piggyback Die Rack mounts to the 2 accessory holes (no drilling required) on the back of your Ultramount and holds 4 dies installed in the LEE ...
$13.50
Piggyback die rack for LEE Breech lock quick change bushings
Images / 1 / 2

Piggyback die rack for LEE Breech lock quick change bushings

$13.50

More Details →
Standard height roller lever LEE Breech lock challenger
Standard height roller lever LEE Breech lock challenger
Standard height roller lever LEE Breech lock challenger This lever is the same height as the factory lever, but features a super comfortable roller...
$50.00
Standard height roller lever LEE Breech lock challenger
Images / 1 / 2 / 3 / 4

Standard height roller lever LEE Breech lock challenger

$50.00

More Details →
Ergonomic roller lever for the LEE Breechlock Challenger & Challenger III
Ergonomic roller lever for the LEE Breechlock Challenger & Challenger III
LEE Breechlock Challenger & Challenger III These levers are manufactured to eliminate the uncomfortable bending over action you must perform to...
$55.00
Ergonomic roller lever for the LEE Breechlock Challenger & Challenger III
Images / 1 / 2 / 3

Ergonomic roller lever for the LEE Breechlock Challenger & Challenger III

$55.00

More Details →
Articulating arm for the LEE Perfect powder measure
Articulating arm for the LEE Perfect powder measure
This articulating arm and bracket system mounts to the rear of any Ultramount system or bolts to directly to your bench. It is built to work with t...
$39.50
Articulating arm for the LEE Perfect powder measure
Images / 1 / 2

Articulating arm for the LEE Perfect powder measure

$39.50

More Details →
Ultramount™ Press Riser for Forster Co-AX and CoAx XL presses
Ultramount™ Press Riser for Forster Co-AX and CoAx XL presses
The tall Ultramount raises your Forster Co-AX or Co-Ax XL press up 9-3/4" to get the shell holder closer to your eyes while increasing stability, ...
$85.00
Ultramount™ Press Riser for Forster Co-AX and CoAx XL presses
Images / 1 / 2 / 3 / 4 / 5 / 6

Ultramount™ Press Riser for Forster Co-AX and CoAx XL presses

$85.00

More Details →
Sidebin system for Forster Co Ax & CoAx XL
Sidebin system for Forster Co Ax & CoAx XL
Streamlined workflow!    This system puts 2 bins up close to the press loading/unloading area, one on each side of the press to increase comfort a...
from $29.50
Sidebin system for Forster Co Ax & CoAx XL
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9

Sidebin system for Forster Co Ax & CoAx XL

$47.50

More Details →
Forster Co Ax Roller Lever SHORT
Forster Co Ax Roller Lever SHORT
Roller lever converts the Co-ax press to a super smooth roller set up. These 6" levers are for short, quick operations.  Also fits the new COAX XL ...
$44.00
Forster Co Ax Roller Lever SHORT
Images / 1 / 2 / 3

Forster Co Ax Roller Lever SHORT

$44.00

More Details →
Forster Co Ax roller lever. Standard height.
Forster Co Ax roller lever. Standard height.
Roller lever converts the Co-ax press to a super smooth roller set up. This lever is the same height as the factory lever.   Also fits the new COAX...
$44.00
Forster Co Ax roller lever. Standard height.
Images / 1 / 2

Forster Co Ax roller lever. Standard height.

$44.00

More Details →
Forster Co-Ax Increased Access Side links Linkages CoAx
Forster Co-Ax Increased Access Side links Linkages CoAx
For reloaders that need a little more room when loading and unloading the shellholder. These have been very well received/reviewed and Co Ax users ...
$39.50
Forster Co-Ax Increased Access Side links Linkages CoAx
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7

Forster Co-Ax Increased Access Side links Linkages CoAx

$39.50

More Details →
Dual LED Shell Plate Lighting Kit for the Forster Co-Ax press
Dual LED Shell Plate Lighting Kit for the Forster Co-Ax press
Dual LED Shell Plate Lighting Kit for the Forster Co-Ax press Two low profile 2"long High output led strips light up your Co-ax so you can see ever...
$34.00
Dual LED Shell Plate Lighting Kit for the Forster Co-Ax press
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7

Dual LED Shell Plate Lighting Kit for the Forster Co-Ax press

$34.00

More Details →
Ultramount™ Press Riser for Lyman Orange Crusher press
Ultramount™ Press Riser for Lyman Orange Crusher press
The tall Ultramount raises your Lyman Orange Crusher press up 9-3/4" to get the shell holder closer to your eyes while increasing stability, leve...
$85.00
Ultramount™ Press Riser for Lyman Orange Crusher press

Ultramount™ Press Riser for Lyman Orange Crusher press

$85.00

More Details →
Ultramount™ Press Riser for Lyman Spartan press
Ultramount™ Press Riser for Lyman Spartan press
  The tall Ultramount raises your Lyman Spartan press up 9-3/4" to get the shell holder closer to your eyes while increasing stability, leverage ...
$85.00
Ultramount™ Press Riser for Lyman Spartan press

Ultramount™ Press Riser for Lyman Spartan press

$85.00

More Details →
Ultramount™ Press Riser for Lyman Brass Smith Victory Single Stage press
Ultramount™ Press Riser for Lyman Brass Smith Victory Single Stage press
The tall Ultramount raises your Lyman Brass Smith Victory Single Stage press up 9-3/4" to get the shell holder closer to your eyes while increasin...
$85.00
Ultramount™ Press Riser for Lyman Brass Smith Victory Single Stage press
Images / 1 / 2 / 3 / 4 / 5 / 6

Ultramount™ Press Riser for Lyman Brass Smith Victory Single Stage press

$85.00

More Details →
Ultramount™ Press Riser for Lyman Brass Smith Ideal Single Stage press
Ultramount™ Press Riser for Lyman Brass Smith Ideal Single Stage press
The tall Ultramount raises your Lyman Brass Smith Ideal Single Stage press up 9-3/4" to get the shell holder closer to your eyes while increasing ...
$85.00
Ultramount™ Press Riser for Lyman Brass Smith Ideal Single Stage press
Images / 1 / 2 / 3 / 4 / 5

Ultramount™ Press Riser for Lyman Brass Smith Ideal Single Stage press

$85.00

More Details →
Sidebin system for Lyman Victory, American 8, Ideal C frame and T Mag II presses
Sidebin system for Lyman Victory, American 8, Ideal C frame and T Mag II presses
Extra storage right next to the press is always a welcome addition and really helps with organization, comfort and economy of motion. The sidebin s...
$40.00
Sidebin system for Lyman Victory, American 8, Ideal C frame and T Mag II presses
Images / 1 / 2 / 3 / 4 / 5

Sidebin system for Lyman Victory, American 8, Ideal C frame and T Mag II presses

$40.00

More Details →
Ergonomic roller lever for Lyman Brass Smith All American 8 Turret & Brass Smith Victory
Ergonomic roller lever for Lyman Brass Smith All American 8 Turret & Brass Smith Victory
The Ergonomic roller levers for the Lyman Brass-Smith All American 8 Turret & Brass-Smith Victory presses help you be comfortable during reload...
$65.00
Ergonomic roller lever for Lyman Brass Smith All American 8 Turret & Brass Smith Victory
Images / 1 / 2 / 3 / 4 / 5

Ergonomic roller lever for Lyman Brass Smith All American 8 Turret & Brass Smith Victory

$65.00

More Details →
Lyman 450 & 4500 Lubersizer roller conversion
Lyman 450 & 4500 Lubersizer roller conversion
Great addition to your 450, features a super comfortable roller handle and durable powdercoated finish. (This version is for the threaded model)
$45.00
Lyman 450 & 4500 Lubersizer roller conversion
Images / 1 / 2

Lyman 450 & 4500 Lubersizer roller conversion

$45.00

More Details →
Ultramount™ Press Riser for MEC Marksman Single Stage press
Ultramount™ Press Riser for MEC Marksman Single Stage press
The tall Ultramount raises your MEC Marksman Single Stage press up 9-3/4" to get the shell holder closer to your eyes while increasing stability,...
$85.00
Ultramount™ Press Riser for MEC Marksman Single Stage press

Ultramount™ Press Riser for MEC Marksman Single Stage press

$85.00

More Details →
Ergonomic style roller handle for the MEC Marksman press
Ergonomic style roller handle for the MEC Marksman press
No more uncomfortable leaning over or bending a knee to get the ram all the way up!    Lever design allows your elbow to be straighter on the upstr...
from $60.00
Ergonomic style roller handle for the MEC Marksman press
Images / 1 / 2 / 3

Ergonomic style roller handle for the MEC Marksman press

$60.00

More Details →
Ultramount™ Press Riser for L.E. Wilson Single Stage press
Ultramount™ Press Riser for L.E. Wilson Single Stage press
  The tall Ultramount raises your L.E. Wilson Single Stage press up 9-3/4" to get the shell holder closer to your eyes while increasing stability, ...
$85.00
Ultramount™ Press Riser for L.E. Wilson Single Stage press
Images / 1 / 2 / 3 / 4 / 5

Ultramount™ Press Riser for L.E. Wilson Single Stage press

$85.00

More Details →
9 3/4" tall Quick Change Ultramount
9 3/4" tall Quick Change Ultramount
Raises your reloading press up to get the action closer to your eyes and increase reloading comfort and ergonomics. Super solid 3\16 steel constru...
$85.00
9 3/4" tall Quick Change Ultramount
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10

9 3/4" tall Quick Change Ultramount

$85.00

More Details →
7 1/2" tall Junior Quick Change Ultramount
7 1/2" tall Junior Quick Change Ultramount
Ultramount JR has the same beefy 3\16" thick steel construction as the standard Ultramount, however the JR is only 7 1/2" tall.  (Note) With Ultram...
$80.00
7 1/2" tall Junior Quick Change Ultramount
Images / 1 / 2 / 3 / 4 / 5 / 6

7 1/2" tall Junior Quick Change Ultramount

$80.00

More Details →
4" tall Micro Quick Change Ultramount
4" tall Micro Quick Change Ultramount
 Ultramount Micro 4" has the same beefy 3\16" thick steel construction as the standard Ultramount, however, Micro is only 4" tall.  (Note) With Ult...
$80.00
4" tall Micro Quick Change Ultramount
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9

4" tall Micro Quick Change Ultramount

$80.00

More Details →
Flush Mount Quick Change Baseplate
Flush Mount Quick Change Baseplate
One mount, countless uses.    The flush mount quick change baseplate is for the reloader who's bench serves many purposes. Enjoy a clear, flat work...
$49.95
Flush Mount Quick Change Baseplate
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26

Flush Mount Quick Change Baseplate

$49.95

More Details →
Spacer for flush mount base plate. (Required if you are not routing the flush mount base plate into your bench.)
Spacer for flush mount base plate. (Required if you are not routing the flush mount base plate into your bench.)
The flush mount baseplate was designed to be routered into your bench to provide a nice flat benchtop.  However, If you don't want to route your be...
$14.95
Spacer for flush mount base plate. (Required if you are not routing the flush mount base plate into your bench.)

Spacer for flush mount base plate. (Required if you are not routing the flush mount base plate into your bench.)

$14.95

More Details →
Quick change top plates for Reloading presses & equipment by BRAND
Quick change top plates for Reloading presses & equipment by BRAND
These are the required top plates that lock into the InLine Fabrication Quick change mounts.   Select the ones you need from the drop down menu. T...
from $28.95
Quick change top plates for Reloading presses & equipment by BRAND
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 / 33 / 34 / 35 / 36

Quick change top plates for Reloading presses & equipment by BRAND

$28.95

More Details →
Quick change top plates for vises, barrel vises, case trimmers, etc
Quick change top plates for vises, barrel vises, case trimmers, etc
These are the required top plates that lock into the InLine Fabrication Quick change mounts. The ones in this category are made for specific vises,...
from $28.95
Quick change top plates for vises, barrel vises, case trimmers, etc
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23

Quick change top plates for vises, barrel vises, case trimmers, etc

$28.95

More Details →
Frequently requested CUSTOM QC top plate's list
Frequently requested CUSTOM QC top plate's list
Here is a list of frequently requested CUSTOM quick change top plates that we have the patterns for, but don't actively stock.  Having them listed ...
from $28.95
Frequently requested CUSTOM QC top plate's list
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31

Frequently requested CUSTOM QC top plate's list

$39.95

More Details →
Quick change system base plate. Baseplate (Only used to convert your existing dedicated Ultramount mount into quick change style mount)
Quick change system base plate. Baseplate (Only used to convert your existing dedicated Ultramount mount into quick change style mount)
The quick change system base plate is adaptable to all previous Ultramounts, so if you already have an Ultramount (9 3/4 tall standard, 7.5" JR or ...
$39.95
Quick change system base plate. Baseplate (Only used to convert your existing dedicated Ultramount mount into quick change style mount)
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9

Quick change system base plate. Baseplate (Only used to convert your existing dedicated Ultramount mount into quick change style mount)

$39.95

More Details →
LYMAN universal press stand to InLine Fab Quick change conversion base plate (Only used to convert your factory Lyman universal press stand to accept InLine Fab quick change top plates)
LYMAN universal press stand to InLine Fab Quick change conversion base plate (Only used to convert your factory Lyman universal press stand to accept InLine Fab quick change top plates)
Ok, so your wife bought you one for a gift, or maybe you had one too many drinks while surfing the web and accidentally ended up with a Lyman Unive...
$39.50
LYMAN universal press stand to InLine Fab Quick change conversion base plate (Only used to convert your factory Lyman universal press stand to accept InLine Fab quick change top plates)
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10

LYMAN universal press stand to InLine Fab Quick change conversion base plate (Only used to convert your factory Lyman universal press stand to accept InLine Fab quick change top plates)

$39.50

More Details →
Elevating QC workbase
Elevating QC workbase
Raise your work to the height you want, when you want, then drop it back down in about 20 seconds. When used in combination with the InLine Fabrica...
from $55.00
Elevating QC workbase
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19

Elevating QC workbase

$60.00

More Details →
Single Storage Dock for Quick Change Top Plates
Single Storage Dock for Quick Change Top Plates
These wall/bench/InLine Rail mount storage docks secure your Quick Change top plates when they are not installed in your Quick Change base.  Keeps ...
$14.95
Single Storage Dock for Quick Change Top Plates
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11

Single Storage Dock for Quick Change Top Plates

$14.95

More Details →
Double Storage Dock for Quick Change Top Plates
Double Storage Dock for Quick Change Top Plates
These wall/bench/InLine Rail mount storage docks secure your Quick Change top plates when they are not installed in your Quick Change base.  Keeps ...
$24.95
Double Storage Dock for Quick Change Top Plates
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7

Double Storage Dock for Quick Change Top Plates

$24.95

More Details →
Edge Mount SINGLE Storage Dock for Quick Change Top Plates
Edge Mount SINGLE Storage Dock for Quick Change Top Plates
This edge mount style dock stores your Quick Change Top Plates when they are not locked into your in your Quick Change base.    They are made to be...
$18.95
Edge Mount SINGLE Storage Dock for Quick Change Top Plates
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11

Edge Mount SINGLE Storage Dock for Quick Change Top Plates

$18.95

More Details →
Edge Mount DOUBLE Storage Dock for Quick Change Top Plates
Edge Mount DOUBLE Storage Dock for Quick Change Top Plates
This Edge Mount version of the double storage dock stores your QC top plates when they are not locked into your in your quick change base.    They ...
$26.95
Edge Mount DOUBLE Storage Dock for Quick Change Top Plates
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8

Edge Mount DOUBLE Storage Dock for Quick Change Top Plates

$26.95

More Details →
Ultramount™ Press Riser for Short Action Customs Nexus press
Ultramount™ Press Riser for Short Action Customs Nexus press
The tall Ultramount raises your Short Action Customs Nexus press up 9-3/4" to get the shell holder closer to your eyes while increasing stability,...
$85.00
Ultramount™ Press Riser for Short Action Customs Nexus press
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7

Ultramount™ Press Riser for Short Action Customs Nexus press

$85.00

More Details →
Triple bin sidebin for SAC Nexus press w/ (3) black bins & (3) bin barriers
Triple bin sidebin for SAC Nexus press w/ (3) black bins & (3) bin barriers
Triple bin sidebin for the Short Action Customs Nexus press!  This powdercoated heavy gauge steel premium press accessory puts 3 bins as close as y...
$55.00
Triple bin sidebin for SAC Nexus press w/ (3) black bins & (3) bin barriers
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10

Triple bin sidebin for SAC Nexus press w/ (3) black bins & (3) bin barriers

$55.00

More Details →
Benchplate for Short Action Customs Nexus press. SAC
Benchplate for Short Action Customs Nexus press. SAC
Benchplate for the Short Action Customs Nexus press Heavy powdercoated steel benchplate simplifies installation of the Nexus and increases the stab...
$44.00
Benchplate for Short Action Customs Nexus press. SAC
Images / 1 / 2 / 3 / 4 / 5 / 6

Benchplate for Short Action Customs Nexus press. SAC

$44.00

More Details →
LED Skylight kit for Short Action Customs SAC Nexus
LED Skylight kit for Short Action Customs SAC Nexus
LED Skylight kit for the Short Action Customs SAC Nexus Super bright LED cluster lights up your Nexus press so you can easily see everything going ...
$39.00
LED Skylight kit for Short Action Customs SAC Nexus
Images / 1 / 2 / 3 / 4 / 5

LED Skylight kit for Short Action Customs SAC Nexus

$39.00

More Details →
Removable Catch/Tool/Parts tray for quick change
Removable Catch/Tool/Parts tray for quick change
This tray is the solution to catching shavings or having tools/parts/components up at the same height as your press, vise or trimmer.    It attache...
$22.00
Removable Catch/Tool/Parts tray for quick change
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21

Removable Catch/Tool/Parts tray for quick change

$22.00

More Details →
Powder measure stand
Powder measure stand
A versatile super thick steel powder measure stand that can be mounted straight to your benchtop or quick change plate?  What's not to like?       ...
$90.00
Powder measure stand
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23

Powder measure stand

$90.00

More Details →
Extra powder measure legs
Extra powder measure legs
These are the extra measure legs that lock into our powder measure stand.  Powder legs accept any standard 7/8" threaded measure. Hornady #050069 ...
$13.95
Extra powder measure legs
Images / 1 / 2 / 3

Extra powder measure legs

$13.95

More Details →
Extra powder measure leg storage docks
Extra powder measure leg storage docks
These are the powder measure docks that store our powder measure legs.   Grab one for each of your measures.  
$11.95
Extra powder measure leg storage docks
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7

Extra powder measure leg storage docks

$11.95

More Details →
Powder leg for Forster Benchrest / Harrell's measures (Clamp style)
Powder leg for Forster Benchrest / Harrell's measures (Clamp style)
These are the Powder leg for the Forster Benchrest / Harrell's measures (Clamp style)   
$14.95
Powder leg for Forster Benchrest / Harrell's measures (Clamp style)

Powder leg for Forster Benchrest / Harrell's measures (Clamp style)

$14.95

More Details →
Powder measure articulating arm.
Powder measure articulating arm.
This articulating arm and bracket system mounts to the rear of any Ultramount system or bolts to directly to your bench. Fully adjustable and swing...
$44.50
Powder measure articulating arm.
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8

Powder measure articulating arm.

$44.50

More Details →
Universal double component tray system.
Universal double component tray system.
Mounts to the rear of any Ultramount system, flush mount QC base or bolts to directly to your bench. Fully adjustable and swings away when not in u...
$48.50
Universal double component tray system.
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7

Universal double component tray system.

$48.50

More Details →
12" Long bin rail system
12" Long bin rail system
Heavy gauge steel rail mounts to the front edge of your bench ( Or wall ) and provides a rigid, secure rail long made to attach 3 bins perfectly.  ...
from $16.50
12" Long bin rail system
Images / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8

12" Long bin rail system

$29.50

More Details →